EYSIN S30 Dust Mite Vacuum Cleaner – User Manual

The EYSIN S30 is a high-efficiency dust mite vacuum cleaner designed to provide deep cleaning solutions for your home. Equipped with germicidal UV light and a multi-stage filtration system, it effectively eliminates up to 99.99% of dust mites and allergens, ensuring a healthier living environment.

 

📦 What’s in the Box

  • EYSIN S30 Main Unit

  • Dual Dust Collection Cups

  • MIF Filter

  • User Manual

🛠️ First-Time Setup

  1. Unpack the Unit: Carefully remove all packaging materials and ensure all components are present.

  2. Assemble Components: Attach the dual dust collection cups to the main unit.

  3. Check Filters: Ensure the MIF filter is properly installed.

  4. Power Connection: Plug the unit into a standard 220-240V~/50/60Hz power outlet.

🧽 Operating Instructions

1. Preparation:

  • Ensure the surface to be cleaned is dry.

  • Remove any large debris manually.

2. Operation:

  • Press the power button to turn on the device.

  • Gently glide the vacuum cleaner over the surface, allowing the UV light and suction to effectively eliminate dust mites.

  • For optimal results, move the device slowly to ensure thorough cleaning.

3. Post-Cleaning:

  • Turn off the device and unplug it from the power source.

  • Empty the dust collection cups and clean the filters as needed.

🧼 Cleaning and Maintenance

  • Dust Collection Cups: Empty and rinse with warm soapy water after each use. Dry thoroughly before reassembling.

  • HEPA Filter: Clean every two weeks by gently tapping to remove dust. Replace every 3-6 months or as needed.

  • Exterior: Wipe with a damp cloth. Do not immerse the main unit in water.

Safety Tips:

  • Always unplug the device before cleaning or maintenance.

  • Do not use the vacuum cleaner on wet surfaces.

⚠️ Safety Precautions

  • Do not operate the appliance with a damaged cord or plug.

  • Keep hands and utensils away from moving parts.

  • Do not use the appliance outdoors.

  • Unplug the unit when not in use and before cleaning.

  • Do not immerse the motor unit in water or any other liquid.

🛠️ Troubleshooting

Issue Possible Cause Solution
Appliance not working Not plugged in Plug into a functioning outlet
  Dust collection cups not secured Ensure cups are properly attached
Unusual noise or vibration Loose parts Check and secure all components
Poor performance Filters clogged Clean or replace filters

📐 Technical Specifications

  • Model: EYSIN S30

  • Voltage: 220-240V~/50/60Hz

  • Power:400W

  • Suction: 21.000PA

  • UV Light: Germicidal, eliminates up to 99.99% of dust mites

  • Filtration System: Multi-stage with MIF filter

  • Weight: 1.9KG

  • Cord: 5mL